2020-12-31

Xtool A80 H6 Programs Mahindra XUV 500 Smart Key

 Purpose: add  a new  Smart Key for Mahindra XUV 500 with  Xtool A80 H6 8 Inch Tablet via OBD

Prepare 
XTOOL A80 H6 Key Programmer
One original car key+ one blank key
Mode: Via OBD

Main operation guide: 
Step 1: Functions and Model choose 
Step 2: Program Keys 
Step 3:New Key test


Step 1: Functions and Model choose 
First, We should connect XTOOL A80 H6 to the Mahindra XUV 500 via OBD, then power on
Click “Diagnosis” menu on the desktop>>Click “Immobilizer”>>Agree to the “Disclaimer”


Then choose the car model.
>>MAHINADRA>>New Software>>Smasrt Key>>XUV 500





Step 2: Program Keys 
Turn on the ignition


>>Program keys>>Program two keys 


Switch ignition  off, pree OK to continue

Switch ignition  on, pree OK to continue 

Put 2 keys to be programmed into the cup holder ,press OK to continue


Success, turn off the ignition for 2 minutes ,Press OK

Step 3:New Key test

The new key works!Xtool A8 H6 add Mahindra XUV 500 Smart Key successed

http://xtoolsupport.com/xtool-a80-h6-add-mahindra-xuv-500-smart-key/

2020-12-28

XTOOL X100 PAD3 For Mercedes-Benz Key Programming

 XTOOL X100 PAD3  (X100 PAD ELITE )is able to do the key program for Mercedes-Benz, Look here:



Part 1: XTOOL X100 PAD Elite Mercedes-Benz Key Programming Car List

Car makerModelYear/ChassisFunction
BENZA Series2005-20131.Read EIS Info

2.Read/Write IR Key lnfo

3.Generate Key File
4.Password Calculation (With Programmed Key)

BENZB Series2005-20131.Read EIS Info               2.Read/Write IR Key lnfo

3.Generate Key File
4.Password Calculation(With Programmed Key)

BENZC/CLK Series2006-20131.Read EIS Info

2.Read/Write IR Key lnfo

3.Generate Key File
4.Password Calculation (With Programmed Key)

BENZCLA Series2013-20161.Read EIS Info

2.Read/Write IR Key lnfo

3.Generate Key File
4.Password Calculation (With Programmed Key)

BENZCL Series2006-20131.Read EIS Info
2.Read/Write lR Key lnfo

3.Generate Key File
4.Password Calculation(With Programmed Key)

BENZCLS Series2006-20131.Read EIS Info

2.Read/Write IR Key lnfo

3.Generate Key File
4.Password Calculation(With Programmed Key)

BENZE Series2005-20151.Read EIS Info

2.Read/Write IR Key Info

3.Generate Key File

4.Password Calculation(With Programmed Key)

BENZG Series-20151.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation (With Programmed Key)
BENZGL/GLS Series2006-20131.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation (With Programmed Key)
BENZGLC/GLK Series2008-20141.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation(With Programmed Key)
BENZM/ML Series2006-20131.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation(With Programmed Key)
BENZR Series2006-20161.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation(With Programmed Key)
BENZS Series2006-20121.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation(With Programmed Key)
BENZSLK/SLC Series2006-20161.Read EIS Info
2.Read/Write IR Key Info
3.Generate Key File
4.Password Calculation(With Programmed Key
BENZML Series163 Chassis1.Remote matching
BENZC/CLK Series204 Chassis1.Luggage lid operation
BENZE Series212,213 Chassis 11.Luggage lid operation
BENZGLE Series166 Chassis1.Luggage lid operation
BENZS Series221 Chassis1.Luggage lid operation




Part 2: How to add Mercedes-Benz Infrared Key by X100 PAD3?

Tools need:

XTOOL X100 PAD Elite

XTOOL KC501 Key & Chip Key Programmer

One original car key+ one blank key

Mode: Via OBD





Main operation guide:

Step 1: Read EIS info

Step 2: Get password from the programmed car key

Step 3: Generate the key file



Step 1: Read EIS info

Connect X100 Pad3 tablet with WiFi firstly

Enter main menu, select [Immobilization] -> [BENZ]-> Agree with the disclaimer-> select [Infrared key system] -> [Add Key]



Read the on-screen instruction of [Add key]

Make sure the network connection is ok and press “Ok” to continue

Then operate as below:

-Connect KC501 to XTOOL X100 Elite



-Insert the original car key into the EIS



-Wait for 5 seconds, and then remove the original car key from the EIS

Click on “OK” on the screen

Select the communication method with EIS, and press “OK” to continue

Select [Read via OBD] -> [Automatic Identify]


 

Read out the EIS info and press “Next”




Step 2: Get password from the programmed car key

Follow the prompt to insert the same original car key into the lock

Wait for 5 seconds, and then remove the original car key from the lock

Press “OK” to continue

Follow the steps below to operate:

The original car key has passed the verification, and the original car key data will be collected soon. Note that after the data collection is completed, the original car key needs to be inserted into the lock and wait for 30 seconds, and then the car can be started normally after inserting and removing the key several times.

Insert the same original car key into the infrared key jack of KC501



Press “OK” on the screen to collect data…

Wait for about 5-15 minutes until the collection data is successful.

Insert the programmed key into EIS (without turning on the ignition switch)

Wait for 30 seconds, put it out and reinsert it

The programmed key may need to be plugged and unplugged many times to start the car normally.

Press “OK” to obtain the password and press “OK”




Step 3: Generate the key file

Choose one key location to be generated (select any one unused key)

Press “OK”



Insert a new key into KC501 infrared key slot, and press “OK”

Key file has been written into the new key and press “OK”



Finally, test the programmed key and original key to check if both of them can start normally and the remote is ok.



Get Xtool X100 PAD3 Plus Xtool KC501 at reasonable price:

https://www.xtool.co.uk/wholesale/xtool-x100-pad3-plus-xtool-kc501.html














2020-12-25

Xtool V-A-G Point Code Operation Guide

With Xtool  MQB Point Code, XTOOL X100 PAD2, X100 PAD2 PRO / X100 PAD3 will be granted for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming i.e golf 7 2013.

 

During this process,  internet connection is required, so that Xtool Pad is able to connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.

 

After ordering from xtool.co.uk, you will receive an email with your activation code. Keep this email handy, because you are supposed to enter the code at the time of programming.



How to get Xtool VAG Token?

It’s only for 7.8 pounds at xtool.co.uk. Just order it and then contact us to get one code. Online sending! No need shipping!

After ordered, you will receive an email with your activation code. Keep this email because you need to enter the code for programming.



How to use Xtool VAG Token?

Step 1: Select “the vehicle system”:

Different vehicle system interfaces are shown as below:

VW 4th Immobilizer System

Xtool V-A-G Point Code Operation Guide 1

Audi 5th Immobilizer System

Xtool V-A-G Point Code Operation Guide 2Xtool V-A-G Point Code Operation Guide 3

Audi MQB Platform

Xtool V-A-G Point Code Operation Guide 4

Step 2: Select “Online mode”

Xtool V-A-G Point Code Operation Guide 5

Step 3: Then you will receive an order information “This password needs to be paid to get it, please contact your local dealer or Xtool”.

Please enter your activation code at this time.

Xtool V-A-G Point Code Operation Guide 2

Step 4: Once you input the valid code, it starts getting “Calculation Request Number…”. It will take 30 seconds to 3 minutes in whole process, please be patient!

Xtool V-A-G Point Code Operation Guide 5

Step 5: When the calculation process is done, you will get a message “Get data successfully!”

Xtool V-A-G Point Code Operation Guide 6

Please kindly notice:

If your internet was interrupted during the online calculation, you will receive an error report “Error code: E40303 Failed to get valid immobilizer information, please connect the dealer or after-sales department”.
Xtool V-A-G Point Code Operation Guide 7

Don’t worry about this problem, your VAG Point Code is still available to use if the calculation fails. Just try to start the calculation using the same code again.

Step 6: Finally, you can add a key or do all keys lost for VAG 4th / 5th IMMO & MQB Immobilizer system.



Available link to get XTOOL MQB Online Programming Token: https://www.xtool.co.uk/wholesale/xtool-online-mqb-code.html



http://xtoolsupport.com/xtool-vag-token/








How to program a Toyota G Chip Key using xtool D8

  Purpose:   program a G chip key for a Toyota Model:   Toyota Tacoma 2011 Tool option:   Xtool D8 Bi-Directional OBD2 Diagnostic Scanner He...