Solution to Chevy P0300 Avalanche 2008 code with Xtool X100 PAD3?

 

How to solve 2008 Chevrolet Avalanche P0300 Trouble code by using XTOOL X100 PAD3/ X100 PAD3 SE? Check the step-by-step guide as below.

Now let’s start it.

Firstly, use the main cable and OBDII connector to connect X100 PAD3 and the vehicle
(The OBD port of the vehicle is under the steering wheel.)


After The Xtool tablet is turned on, then go to Diagnosis-> America-> CHEVROLET-> Automatic selection-> Avalanche- 4WD

We have automatic air conditioning and there’s another type of legacy step for leveling system, so just operate as below for vehicle configuration property.

• Air conditioning: Auto. HVAC
• Leveling system: Without (PRO Z95)

Then confirm the vehicle info read out.

Select Auto Diagnose, there are more than 20 systems need to be scanned, so just keep patient.
After all systems are diagnosed, go to Engine control module-> Read Trouble Code-> Diagnostic trouble code





The fault code is P0300-00 engine misfire detected.

Then click “Clear trouble codes” to erase all the fault codes
Erase the fault code successfully

Now there is no fault code.

Click “Diagnostic trouble code” to check again, it also shows “No fault code present”.
After that, try to turn off the engine, and restart again. The trouble code comes back.
In that case we are going to check what’s happening. Some stuff in near the spark plugs or the injectors or the high tension wires. Maybe there’s some problem with it if the trouble is going.
Finally, after changing the spark plugs and the high tension wires, the system was back.




That’s whole process we use XTOOL X100 PAD3 key programmer to diagnose and clear fault code for 2008 Chevrolet Avalanche.

 

https://www.xtool.co.uk/service/how-to-fix-chevy-p0300-code-with-xtool-x100-pad3.html

Xtool X100 PAD3 Program Mazda Type 5 All Keys Lost

It is a Mazda car (type5). The customer lost all keys. The new keys programming were completed by Xtool X100 PAD3 key programmer.



Note:
1.This tutorial applies to xtool tablet incl. Xtool Xpad elite, X100 pad 2 and X100 PAD

2.In Immobiliser function, you can use two ways to select your vehicle: by type and by vehicle are both OK
3.This operation must be connected to the network
4.In all keys lost function, the all keys will be erased



Main operation guide:

In general, directly connect X100 PAD 3 to the vehicle via main diagnostic cable is ok.

For the convenience of viewing the test, connect x100 pad3, dashboard, Mazda ECU and the ignition test platform as follows

When turn the ignition on, the engine IMMO warning light appears on the dashboard.

Select Diagnosis->Immobilizer-> MAZDA-> agree with the disclaimer-> Select by type-> Type 5-> All keys lost

 

Read all keys lost instruction and press “YES” to continue

l All key will be erased and the min keys are required is 2.



Then complete the following procedures, engine can be started:

1.Switch ignition off

2.Switch ignition on with key 1 for 3 sec and then switch off and remove the key


3.Switch ignition on with key 2 for 3 sec and then switch off and remove the key



4.If you want to add more keys, please repeat procedure 3

When the procedure is complete, use the two keys to turn on the ignition switch separately, the engine IMMO warning light disappears.

Read the number of keys is 2 now.



Xtool x100 pad 3 program keys to Mazda type 5 successfully.



FYI…

Automaker	Area	Model	System	Function
MAZDA	Europe	BT-50 (2011-)	Non smart key	1.Add key 2.Erase keys 3.All lost 4.Number of key
MAZDA	Europe	Mazda 121	Non smart key	1.Current number of keys 2.All Keys Lost 3.Add Key
MAZDA	Europe	Mazda 2 (2002-2008)	Non smart key	1.Number of keys 2.Add a key 3.All keys lost
MAZDA	Europe	Mazda 2 (2008-2014)	Smart key system	1.All keys lost 2.Add keys 3.All smart keys lost 4.Add smart keys 5.Live data  6.Switch ignition on 7.Erase DTC
MAZDA	Europe	Mazda 2 (2008-2014)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda 2 (2014-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mazda 3 (2004-2008)	Smart key system	1.Number of keys 2.Add a key 3.All keys lost 4.Number of smart keys 5.Add a smart key 6.Erase smart keys
MAZDA	Europe	Mazda 3 (2004-2008)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda 3 (2009-2013)	Smart key system	1.All keys lost 2.Add keys 3.All smart keys lost 4.Add smart keys 5.Live data  6.Switch ignition on 7.Erase DTC
MAZDA	Europe	Mazda 3 (2009-2013)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda 3 (2014-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mazda 5 (-2011)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda 5 (2012-)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda 6 (2002-2008)	Non smart key	1.Number of keys 2.Add a key 3.All keys lost
MAZDA	Europe	Mazda 6 (2008-2012)	Smart key system	1.All keys lost 2.Add keys 3.All smart keys lost 4.Add smart keys 5.Live data  6.Switch ignition on 7.Erase DTC
MAZDA	Europe	Mazda 6 (2012-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mazda CX-3 (2016-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mazda CX-5 (2013-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mazda CX-7 (-2016)	Smart key system	1.Add key 2.All keys lost 3.Add smart key 4.Erase smart keys 5.Read number of keys
MAZDA	Europe	Mazda CX-7 (2004-2009)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda CX-7 (2009-)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda CX-9 (2004-2009)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda CX-9 (2009-)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mazda CX-9 (2009-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Demio (-2001)	Non smart key	1.Current number of keys 2.All Keys Lost 3.Add Key
MAZDA	Europe	Demio (2002-2007)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Demio (2008-2013)	Smart key system	1.All keys lost 2.Add keys 3.All smart keys lost 4.Add smart keys 5.Live data  6.Switch ignition on 7.Erase DTC
MAZDA	Europe	Demio (2008-2013)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Demio (2014-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Mx5 (2005-2009)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mx5 (2009-2015)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Mx5 (2016-)	Smart key system	1.All smart keys lost 2.Add a smart key 3.Switch ignition on
MAZDA	Europe	Premacy (2005-)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	Premacy (2005-)	Smart key system	1.All keys lost 2.Add keys 3.All smart keys lost 4.Add smart keys 5.Live data  6.Switch ignition on 7.Erase DTC
MAZDA	Europe	RX-8 (2004-2009)	Non smart key	1.Number of keys 2.Add a key 3.All keys lost
MAZDA	Europe	RX-8 (2009-)	Non smart key	1.Number of keys 2.Add a key 3.All Keys lost
MAZDA	Europe	RX-8 (2009-)	Smart key system	1.Number of keys 2.Add a key 3.All keys lo

For other area Mazda car models, please visit

http://www.xtooltech.com/FUNC_DOC/PS_IKMAZDA_V26_62_EN.PDF



If you are not sure the car model you own can be used with XTOOL X100 PAD3 Tablet Key Programmer or not, please feel free to contact our customer service.

Email: Sales@XTOOL.co.uk
Whatsapp: +86 18223445829

www.xtool.co.uk