Xtool X100 PAD2 Real Feedback on Renault

 Xtool X100 PAD2 is tested as a great key programmer for Renault Megan, Scénic, Espace, Laguna, Clio etc...

 here is the real feedback and test report from the Facebook group in xtool pad2:

2009 Megane II spare key successfully...

Programming lost card Renault Megane 3... programming in 5 min easy with x100pad.. Happy customer... id4 map pcf 7941

Renault Twingo 2011 all keys lost,Xtool straight in programmed

X100 PAD2 GLOBAL GL ver. You have success add a key - cards for Renault after 2010 (Laguna, Megane Scénic Clio 4, etc. 2010 - 2015)

-New card key Renault Laguna
-Immo
-Remote
- 5min.
With x100pad 2 pro

Renault scenic 2006 56
Success reads pin And programmed card with XTool X100 PAD2
Autel im508 failed to read pin
True code failed read the wrong pin
Xtool wins!!! K.O AUTEL ,K.O Truecode!!

AKL on Renault Clio 3. 2 remote keys programmed easy. About 2 mins total. Nice easy job especially with key number in the glove box

Renault Scenic add a card.All ok

2010 Renault Koleos 7941 keycard added. Xpad instructions were not entirely clear but I got there in the end. When done programming, neither key will start car (remote is fine)but leave car for 5 minutes and they will all operate properly

Another Renault kangoo 2007 ph2
All keys lost
Using aftermarket key/ remote
Easy job

Renault kangoo 2006 ph2
All keys lost
Starts and remote works
A happy day with xtool pad2

Renault Megan Scenic 2004 AKL is possible just to add key card new

Renault:
Clio 2 ID46, Kangoo, Master 2, Megane 2, Scenic 2 (before 2008), Clio 3, Modus: OK (akl and add key)

2010 Renault twingo
All keys lost
Read pin
Programmed remote key
Aftermarket key all good

2007 Renault Clio lll
Read pin ok
Programmed key ok
Remote worked and start vehicle
Easy process

2010 Renault traffic
Aftermarket remote key
Work good simple

Renault megan 2 2006 add card .All ok with xtool x100 pad2 key programmer 

RENAULT MEGAN 2005 ADD KEY OK .

Renault Sandero Stepway 2013 - pincode fail.
-2007 Renault Espace IV Phase 2 read Immo-Pin: FAIL
-2007 Renault Espace IV Phase 2 add key: FAIL

 

please look at the Xtool X100 PAD2 / PAD2 PRO Renault function List table:

Xtool X100 PAD2 Renault Function Table V26.87
series	paragraph	vehicle	function
RENAULT	2001-2003	Avantime	1.Program keys 2、Read pincode 2.1.Type 1 2.2.Type 2
RENAULT	2010-2013	Duster(Dacia)
RENAULT		Espace Blade key
RENAULT	2001-2007	Laguna Blade key
RENAULT	2010-2013	Logan (Dacia)
RENAULT	2010-2013	Sandero (Dacia)
RENAULT	2010-2013	Symbol (Dacia)
RENAULT	-2001	Clio	1、Program immobiliser 2、Initate new immobilser
RENAULT	-2001	Kangoo
RENAULT	-2001	Master
RENAULT	2001-2005	Clio	1.12-digit PIN 2.Free pin code 3.Read BCM Code
RENAULT		Clio II	1.Program keys
RENAULT		Clio II HB
RENAULT		Clio II CAMPUS
RENAULT	2003-2010	Espace Card key
RENAULT	2002-2007	Kangoo
RENAULT	2001-2007	Laguna Card key
RENAULT		Laguna Keyless
RENAULT	2004-2009	Logan (Dacia)
RENAULT	2002-2007	Master
RENAULT	2007-2010	Master
RENAULT	2005-2010	Sandero (Dacia)
RENAULT	2003-2005	Solenza
RENAULT	09-10	Symbol (Dacia)
RENAULT	02-06	Trafic
RENAULT	07-14	Trafic
RENAULT	02-07	Twingo
RENAULT	02-07	Valsatis
RENAULT		Valsatis Keyless
RENAULT		Clio III Without smart	1.Read number of keys 2.Program keys 2.1.Input Pin Code 2.2.Free Pin Code
RENAULT		Modus Without smart
RENAULT		Modus With smart	1.Read number of keys 2.Program keys 2.1.Input Pin Code 2.2.Free Pin Code 3.Program remote 4.Erase remotes
RENAULT		Clio III  With smart
RENAULT		Kangoo II	1.Program keys
RENAULT	2010-2016	Master
RENAULT	2007-2014	Twingo
RENAULT	-10	KOLEOS	1.Program keys
RENAULT	08-	Laguna Card key
RENAULT	2008-2012	Valsatis
RENAULT	10-	KOLEOS
RENAULT		LagunaIII
RENAULT	2003-2006	Megane/Scenic	1.Number of keys 2.Program keys
RENAULT	2007-2009	Megane/Scenic
RENAULT	-2015	Captur	1.Read PIN code 2.Learn keys
RENAULT	-2015	Clio IV
RENAULT	2016-	Captur	1.Add key 1.1.Read PIN code 1.2.Send PIN To HFM 1.3.Learn keys
			1.4.Backup FLASH 1.5.Recover FLASH 2.All lost key 2.1.Read PIN code 2.2.Create key 2.3.Send PIN To HFM 2.4.Learn keys 2.5.Backup FLASH 2.6.Recover FLASH 3.Help
RENAULT	2016-	Clio IV
RENAULT	2015-	Espace V	1.Non Smart Key 1.1.Read Number of Keys 1.2.Read EEPROM 1.3.Add Keys 1.4.Learn HFM 1.5.Create Key 1.6.Unlock Key 1.7.HELP 2.With Smart Key 2.1.Read Number of Cards 2.2.Read EEPROM 2.3.Add Cards 2.4.Learn HFM 2.5.Create Card 2.6.Unlock Card 2.7.HELP
RENAULT		kadjar IV
RENAULT		Koleos II
RENAULT	2015-	MEGANE
RENAULT	2016-	Megane/Scenic IV
RENAULT	2015-	Talisman

Where to have one Xtool X100 PAD2?

Bought it from

https://www.xtool.co.uk/wholesale/xtool-x100-pad2-pro-with-vw-4th-5th-immo.html

 

 

Solved! Xtool H6pro with kc501 read-write BMW cas4 failed

Problem: I have a Xtool h6 pro with kc501 (same as Xtool A80 PRO), I'm trying to read/write a BMW cas4 with no success, I follow the wiring diagram and tried the 2 methods the app shows. I've even connected the kc501 to my pc but still no comms.

 

Experienced user's advice:

The black wire and white wire.
Move white wire to the hole in the pcb and try again.

 

xtool.co.uk engineer replied:

Sometimes we have the same problem with Xtool h6 pro ( H6 PRO = Xtool A80 PRO in the aspect of software  ) , we find out it has a poor welding and then re-solder it again, finally we can read and write the data successfully.

 

Hope it helps!

 http://xtoolsupport.com/xtool-a80-pro-cas4-wiring-diagram/

How to reset factory settings by flashing files on XTool

 

If you’ve forgotten or lost your Xtool tablet device screen lock password, PIN, not to mess trial input the password, 3 or 5 attempts wrong it will lock the machine. The only way to unlock your device is to do a factory reset.

*You should need to reset the factory settings by flashing files.

What you need to do:

Step 1: Please purchase XTOOL flash file system service as follows firstly

https://www.xtool.co.uk/wholesale/xtool-flash-flle-system-service.html

Step 2: Provide your device SN and contact our customer service to arrange the XTOOL tech to help you flash your device in your spare time

Step 3: After that, connect the XTOOL tablet to your computer via USB cable

Step 4:Open TeamViewer on your PC and tell us the ID and password

Note: This solution applies to XTOOL key programmers and other tablet series such as X100 PAD, X100 PAD2, X100 PAD2 Pro, X100 PAD3, PS90 Pro, A80 Pro, etc.

Question 1:Kid played with X100 PAD and had the device password Now need help to get the screen lock pin demand off.

Question 2. My X100 PAD stopped booting after system update. Is anyone know how to do factory reset on those pads. Has only one power button and typical android power + volume button to access BIOS won’t work.

Answer: No matter forget your XTOOL device screen password  or cannot start after the update, both you can flash the file system to make your device back to factory reset , then the problem will solve

Any further questions, please feel free to contact us:

Email: Sales@XTOOL.co.uk
Whatsapp: +86 18223445829

http://blog.xtool.co.uk/

 

 

How to Reflash / Initialization Toyota Lexus with XTOOL X100 PAD3 SE + KC501

In this instruction, XTool.co.uk will show you a guide on how to use XTOOL X100 PAD3 SE Key Programmer with KC501 to reflash/initialize immobilizer system for Toyota/Lexus
Refresh/ initialize the ECU data for 2001 IS300 Lexus same for Toyota when all keys lost, okay usually you'll find these years between 1999 and 2001, they usually have a 4C chip in them.

 

MCU Chip: IC900 93C56
Key: TOY43AT4
Transponder: 4C
key code: Passenger Door Lock

We have the ECU that we took off the Lexus vehicle, a Xtool X100 PAD3 SE, the KC501 with the eeprom 8pin clip.

 

 

So as you can see right here a DIP socket, it tells us that the pin number one is down here.

 

In order to connect them to a dip socket.

You need to move the little lever up and that opens the teeth when you move it to the left.

So you guys see where that red cable is.

A little extra sign is gonna be to the left. In other words, the red cable you see right there into the plug, it's gonna be pointing down and it's gonna be in the first, there's two sockets, connect it into the first socket and then close it.

As you're holding it down, you're moving the lever down, so it can be attached there.

 

Alright so you guys see the red wire right is gonna go to pin number one.

 

And On the IC900 chip in the ECU.

So in order to open up the ECU, and that's four screws, turn it around, once screw at the 4 corners.

And this comes off, make sure that when you take this off, you don't come in contact with any type of metal or anything like that.

You also need to take 2 screws off.

 

And then this comes out as soon as you take those two screws off to make sure that you don't put it on any that you don't do any problem on any metal surfaces or anything like that.

Make sure you have a nice little rag or something, you know that you can conduct electricity.

So maybe like some plastic, a rubber mat.

So you don't want to place this over nothing metal, because they might make contact or so we want to just put like a metal under it.

 

 

We're looking for the IC900 chip, let me show you guys where it's at, it's on the corner over here.

Now reading on the IC900 chip 93C56. Remember that number because we're gonna need it later on.

 

That's why we're going to plug in our cable, a clip and you can see it has a small dent on it, a small dental that means that little dot right there, you guys see that means that's indicating that's pin number one.

A little hole is pointing to pin number 1, that's where are our connector's gonna be at okay.

 

So that red wire would be like this.

Okay before you put this clip on, make sure you guys clean the leads right here, the pins.

So get like a little screwdriver or a little wire brush and clean around here, because that's usually where you can read the data because you need to clean up these little leads.

 

Alright, let's continue do this data initialized with X100 PAD3 SE.

We're gonna connect our 8pin clip.

Well there's a little red wire on the left-hand side, this is facing away from you, IC900 chip, make sure you clean the pins where it connects. So I can read the data.

If it doesn't read the data because it's not making good contact.

it's going to number one on the dot, position number one pin.

 

We are going to go to the main menu of X100 PAD3 SE, and go to "Diagnosis".

 

Go to "Other service" and go down "EEPROM adaptor".

 

Go to "Data initialization".

 

Make sure the adapter is connected and power on, the status light is turned on. Yeah, that's connected powered on, we're going to press "OK".

 

 

Go to "Lexus" and then "Immobilizer Initialization".

 

 

It's IS300, make sure you select the correct model and year, this is 2001.

 

Go to 32 bit ECU (93c56), the chip number is the same one that's on the chip.

 

We're gonna go to KC501.

 

128 by 16 we're gonna press OK.

 

Go ahead and open up the file, save the file, please input the file name to save it, save it under the microchip and press OK.

 

The file already exists, do you want to overwrite it, press "Yes".

 

Okay, so read complete, do you want to edit, press "NO", we do not want to edit, we just wanna reflash it, press "Yes" to continue.

 

So we're preparing the data, oaky data initialized successfully.

 

So now we're gonna go ahead put everything back together and we're gonna go ahead and match the keys to the vehicle. 

So let's go connect back to the vehicle and, let's get this thing done.

 

Alright, so we are on the vehicle right now because you can see the immobilizer light is not solid on, the ECU is plugged back in there, make sure you are plugging all cables, each cable goes to each individual slot, it doesn't fit in the other one. Security light is on.

 

We have our 4C chip in here, you can program it to three keys, okay, so this is what we're going to do when I stick it to ignition from off to on five times and leave it on the fifth time, 12345, leave it on and open the door, close it 123456, now this should be programmed, like I said, you can program to 3 keys, we're gonna try it out, make sure that key goes off,  isn't that amazing, immobilizer light is off, our vehicles on, our key is programmed . You can now manually program up to 3 keys, it's really easy, you guys can see the light is flashing back to its normal state.

 

Anytime you stick in the key, and you turn it on, it lights up and then it turns off, so that means that we successfully program the key.

 

And that's how I get the job done, Xtool X100 Pad3 SE, EEPROM, IC900, data initialization with KC501 programmer.

 

https://www.xtool.co.uk/service/xtool-x100-pad3-se-reflash-initialize-toyota-lexus-immobilizer-system.html