XTool Tata BS6 key programming Updated!

 

Good news!Tata BS6  key programming is possible,For all Xtool Key programmer :

X100 PAD Elite (X100 PAD3)
X100 PAD3 SE
X100 PAD2 PRO
X100 PAD2
X100 PAD
X100 PAD PLUS

 

Xtool Software Update LOG , October 2021

 Today, Let’s have a check together what Xtool new functions (diagnosis, key programming,and some special functions)have been updated for vehicles in total in 2021.10

October Software Update Notice

2021-11-09

MAJOR CAR DIAGNOSIS TOOLS UPDATE

 

BENZ – All models V20.40

• Add motion testing and special functions for all systems under chassis 222, 167, 213, 253

• Add 222,167,213,253 rear seat entertainment system control unit under chassis, ABC active body control ADS-automatic shock absorption system (ADS), AMG drive mechanism, engine system, VGS-transmission Control, on-board intelligent information service control unit, electric differential lock, electronically controlled vehicle stabilization system, power electronics, air conditioning, car doors, seats seat belts and other system action test: M87(radiator hundred Vane actuator motor), M91/6(heating circulation circuit circulation pump0， M96/1(air damper actuator motor), M96/2(wind deflector actuation motor), M99 (steering wheel vibration motor), Y32/1 (air pump switching valve 1), Y19/1 (high-voltage battery cooling system shut-off valve), Y101 (bypass air switching valve) ), Y16/2 (heating system shut-off valve), Y130 (engine oil pump valve), Y131 (injector shut-off valve), Y101 (bypass air switching valve), Y51 (left front axle damping valve unit), Y58/1 (purification switching valve), Y62 (fuel injection valve), Y73/1 (low temperature circuit switching valve), Y76 (fuel injection nozzle), Y58/9 (fuel tank exhaust valve),inflate the suspension damper column from the external gas cylinder, accelerate from gear 1 to gear 2, fill the suspension pillar, exhaust the compressed air valve, and close the nozzle.
• Special functions: adjust the transmission shift, reset the start control unit, the teaching process of unit "Y27/7 (low pressure exhaust gas re-circulation actuator)", the teaching process of the unit "Y27/8 (high pressure exhaust gas re-circulation actuator)”, The teaching process of the unit “M16/6 (throttle valve actuator)”, Injector injection volume adjustment, zero-volume calibration adjustment, standardization of power windows, deactivation of production mode, the study value of reset unit "B2/5 (hot film air mass flow sensor)", activation unit' 'M3 (fuel pump)', selective catalytic reduction (SCR), enable engine start after a collision event, reset the learning values of the components “fuel system high pressure pump” and “fuel rail”, reset learning value of components” B175 (temperature sensor unit)", standardization of the right rear window regulator, standardization of the left rear window regulator, standardization of the trunk lid control, self-check, reset operating status and perform voltage matching.

 

BMW - BMW / BMW MINI / Rolls Royce V11.71

• Add 12 F/G chassis hidden functions

• Hidden functions support chassis: all models with F chassis and G chassis (excluding Rolls-Royce)

• Air conditioning memory;
• Air conditioner internal circulation memory
• Open the door and raise the window with one key (rear window);
• Allow to close windows and skylights through the key;
• One-click folding rearview mirror;
• Adjust the downward turning angle of the rearview mirror when reversing;
• Meter 330;
• The maximum instantaneous fuel consumption is changed to 30L;
• Digital vehicle speed;
• Close the reversing image legal statement;
• Turn off the night vision warning legal statement;
• Change ID5 to ID6;
• Enable to watch videos while driving;
• The key can control the opening and closing of the electric tailgate;
• Tire pressure digital and temperature display;
• Add key programming;
• Add ECU matching.

 

Nissan – Nissan V12.60

• Increase special functions for Nissan

• Add 257 special functions for below models:

• X-RTAIL, ALTIMA, Qashqai, SYLPHY, Infiniti Q50L, Infiniti Q50 hybrid, Venucia E30, Venucia R50, Venucia T60, Venucia T70, Venucia T90, Venucia M50V

• Special functions of the urea control module:

• clearing the maximum temperature data of the urea nozzle coil, resetting the heating time of the urea nozzle, clearing the total dose data of the urea nozzle, resetting the remaining amount of urea for vehicles, the first urea filling test, the urea emptying test, the flow rate function, Electrical inspection, vehicle identification number registration, G sensor calibration, clear learning value, clear memory data, clear calibration data, forward clutch point learning, engine brake adjustment, start engine with smart key, ignition/accessory power saver, situation light setting, alarm setting, fog lamp override, setting indicator light-door lock interconnection, wiper linkage, twilight on, front and rear dripping, rain sensor, touch sensor unlock function setting, reverse gear linkage rear wiper setting, day driving Lamp settings, etc.

 

Peugeot - Peugeot V10.80

• Add the version information\ DTC code for all systems, include 1293 sub-systems, under below models:

• 308, 408, expert k0, 407, Ion, bipper, 4007, 508, 107, 308(TX9), BOXER3 EURO5/6, 4008, 5008, 108, 301, 3008, PARTNER 2, 307 CAN, 807 CAN, BOXER 3, 206+, 607R, kp0, 208(Ai91), expert 3, 207 CAN, BOXER3 MINIBUS, 208(P21), 508L(R83);

• Add the version information\ DTC code for all systems, include 149 sub-systems, under blow 4 models:

• 508(R8), 208(P21), RIFTER (K9): PARTNER (K9), Partner 2 Iran-AMLAT;

• First release of Vietnamese.

 

MAJOR KEY PROGRAMMING UPDATE

 

Fiat – All models V26.95

• Supports generate dealer keys and unlock keys via EEPROM files

Chrysler (USA) – Pacifica V27.41

• Support pincode reading

• Add read pincode and key matching
  • Add module synchronization functions after replacing module

 

Nissan – New Sylphy/Sentra (B18) V27.13

• Support replacing HFM module

 

MAJOR SPECIAL FUNCTIONS UPDATE

 

Mileage Adjustment – Suzuki Swift V30.20

• Support multiple models for Swift

• Add dash recovery for 2017+ 70F35XX COLOR VDO,70F35XX MONOCHROME VDO
  • Add dash recovery for 2018+ 70F35XX COLOR VDO,70F35XX MONOCHROME VDO Type1/70F35XX MONOCHROME VDO Type2
  • Add dash recovery for 2020+ (Small screen)70F35XX VDO,70F35XX MONOCHROME VDO,70F3529 VDO, RH850 VDO

 

DPF regeneration – HYUNDAI/ KIA RENAULT/ DACIA V7.10

• Add DPF regeneration function for below models:

• RENAULT TRAVELLER, CLIO III, TWINGO II, MODUS, CAPTUR/QM3/KABIN, CAPTUR II, CAPTUR II CN, KAPTUR, CLIO IV, CLIO V, MEGANE II, SCENIC II, MEGANE III/SCENIC II, MEGANE IV, MEGANE IV SEDAN, MEGANE IV ph2, SCENIC IV, LAGUNA III, ESPACE V, ESPACE V ph2, KANGOO II, KANGOO Z.E., NEW KANGOO LS, KADJAR, TRAFIC III, MASTER III, LOGAN, SANDERO, LOGAN II, NEW SANDERO/LOGA, DUSTER, DUSTER PH2, DUSTER ph3, LODGY, new SM3/FLUENCE/MEGANE, LATITUDE/SM5, TALISMAN/SM6, TALISMAN/SM6 ph2, KOLEOS/QM5, KOLEOS II, ALASKAN, ARKANA, ARKANA CN, XM3
• DACIA LOGAN, SANDERO, LOGAN II, LODGY, DUSTER, DUSTER PH2, DUSTER ph3, CAPTUR/QM3/KABIN

• Add and modify the DPF/GPF for HYUNDAI:

• HYUNDAI ACCENT(HCI), ACCENT(RB), Creta(GS), Creta(SU21), ELANTRA(AD), ELANTRA(ADI), Elantra(CN7), ELANTRA(MD), ELANTRA(MDI), G70(IK)-U.S, G80(DH), G80(RG3), GV80(JX1), Grand i10/Xcent(BA), Grand i10 Nios/Aura(A13), Grand Santafe(NC), Grand Azera(IG), GRANDEUR/AZERA(TG), H-1 BUS(TQ), H-1/iMAX/iLOAD(TQ), H-100 TRUCK(HR), i10(AC3), i20(GB), i20(IB), i20(PB), i20(BC3), i30(FDe), i30(GD), i30(GDe), i30(PD), i30(PDE), i30/ELANTRA NEOS(FD), i40(VF), IONIQ hybrid(AE HEV), IONIQ Phev(AE PHEV), Kona Hybrid(OS HEV), ix20(JC), ix35(EL), Palisade(LX2), SANTAFE(TM), SANTAFE(TMA), Santafe Sport(DMA), SANTAFE(CM), SANTAFE(DM), SANTAFE(DMI), Sonata Hybrid(LF HEV), Sonata(DNB), Sonata Hybrid(DN8 HEV), Sonata(DNBA)-For Mexico, Sonata(LF), Sonata(LFA), SONATA(NF), Tucson(JM), Tucson/ix35(LM/EL), Tucson(TL), Tucson(TLe), Tucson(TLI), VERACRUZ/ix55, VERNA(RBI), Venue(QXI), support the latest 2021 version.

• Add and modify the DPF/GPF for KIA:

• Borrego(HM)/Mohave BORreed, CARENS(FJ), CARENS(UN), CARENS(RP), VQ, NEW Carnival(YP), Carnival(YPi), CARNIVAL/SEDONA(VQ), Cee'd(ED), Cee'd(JD), Cee'd(CD), Cerato/Forte(BD), Cerato/Forte(BDm), cerato/fcrte(YD), K2500/K2700/K3000/K3000S(PU), K5 HEV(DL3 HEV), K5(DL3), Niro(DE HEV), MOHAVE/BORREGO(HM), Optima HEV(JF HEV), Optima(JF), Optima(TF), Optima/Magentis(MG), Picanto/Morning(JA), Optima/Magentis(MG), Chollima(UB), Chollima(YB), Seltos(SP2), Seltos(SP2i), RIO(UB), Sorento(XM), Sorento(UM), SOUL(SK3), SOUL(AM), SOUL(PS), Sportage(KM), Sportage(SL), Sportage(SLE), Sportage(QL), Sportage(QLE), Stinger(CK), Stonic(YB CUV), VENGA(YN), XCeed(CD CUV)

 

Steering angle (Asia)–HYUNDAI/KIA/SSANGYONG V7.78

• Add steering angle function for below models:

• HYUNDAI MOTOR Creta (SU2I), Elantra (CN7), G80(RG3), GV80(JX1), Grand i10 Nios/aura (AI3) and other 2020-2021 version models

• KIA Cee'd(JD), Ceed PHEV(CD PHEV), Cerato/Forte(BD), Cerato/Forte(BDm), Cerato/Forte(TD), Cerato/Forte(YD), K900(RJ), K2500/K2700/K3000/K3000S(PU), K5 HEV(DL3 HEV), K5(DL3), Niro(DE HEV) and other 2020-2021 version models

• SSANGYONG MOTOR' chairperson W, Rexton G4, New Rexton, Tivolan-XLV, New Tivolan

 

Xtool Tablet Series Incl:
Car diagnostic tools:

H6 Pro Master(Xtool A80 pro Master)
H6 PRO(Xtool A80 PRO)
H6 EB (Xtool A80 H6)
H6 Elite
D8
PS80 (XTOOL EZ500)
PS70 PRO (XTOOL EZ400 PRO)
Malaysia Version XTOOL EZ400 PRO
XTOOL EZ300 PRO

Truck Diagnosit Tools
H6D PRO
PS90 PRO
PS 90 Heavy Duty

Auto Key programmers
X100 PAD Elite (X100 PAD3)
X100 PAD3 SE
X100 PAD2 PRO
X100 PAD2
X100 PAD

Xtool newly add Subaru 2021 IMMO Software Update

 Xtool recently launched a major update to SUBARU Key programming:

New added

• All Smart Key Lost
• Pin code
• Free Via OBD Directly

Model added:

Crosstrek PHEV	2013-2021
Evoltis	2017-2021
Forester	2013-2021
Impreza	2012-2021
Impreza WRX	2015-2021
Legacy	2013-2021
Levorg	2015-2020
Liberty	2015-2021
Outback	2013-2021
WPX	2015-2020
VX	2012-2021
VX Crosstrek	2012-2021

The newly added Subaru car models are compatible with X100 PAD2, X100 PAD2 Pro, X100 PAD3 plus KC100/KC501, X100 PAD3 SE, X100 PAD3 SE plus KC501, etc.

 XTool x100 pad3/ x100 pad2 pro for SUBARU car list here:

http://xtoolsupport.com/xtool-tablet-series-key-programming-adds-2021-subaru/

 

Xtool Key Programmer Series February 2021 Software Update

 

Here share the newest key programming car models update notice for XTOOL key programmer incl. X100 PAD, X100 PAD2, X100 PAD2 Pro and X100 PAD3 (X100 PAD Elite). It adds more car models for BMW, Chrysler (USA), Renault (Europe), FORD (USA), Volvo, TRUMPCHI, ROEWE, MG, VW/ Audi/ Skoda/ SEAT, CHERY, GEELY, MAXUS, BAIC MOTOR – Saab, and Benz.

Please kindly notice:

Except Chrysler (USA) V27.37, Renault (Europe) - Carbine/CLIO4 V26.21 and FORD (USA) V27.29 apply to the local dealer devices, other car models added to apply to all X100 PAD series key programmers (regular version).

 

Check the details of update notice as below.

 

BMW V26.70

> CAS 1-3: refresh ECU key programming data: CAS1 (0K50E), CAS2 (2K79X), CAS3 (OLO1Y), CAS3+ (0L15Y), CAS3+ (0M23S): read and write FLASH data (disassembly and read), refresh ECU key programming data, Key matching, reset mileage

> CAS4/CAS4+: refresh ECU key programming data: 5M48H/1N35H, 1L15Y: read and write FLASH data (disassembly and read), refresh ECU key programming data, key matching, reset mileage

> FEM/BDC-I: refresh ECU key programming data: clone key programming data: backup FAFP, write FAFP, backup key programming data, write key programming data, backup coded data, restore coded data, reset smarter lock, synchronize ELV

>FEM/BDC-I: refresh ECU key programming data: calculate key programming data: erase key programming data, write key programming data, backup coded data, restore coded data, reset starter lock, synchronize ELV

> BDC-II: read key information, key disable and enable

> Gearbox system: 6HP E chassis: read ECU information, reset EGS, read ECU information, read matching status, synchronize EGS parameters, clear DTC

> Transmission system: 6HP F chassis: read ECU information, read matching status, synchronize EGS parameters, clear DTC

> Gearbox system: 8HP F chassis: read ECU information, read matching status, synchronize EGS parameters, backup coded data, restore coded data, clear DTC

> Transmission system: 8HP G chassis: read ECU information, backup coded data, restore code, Backup data, and clear DTC

 

Chrysler (USA) V27.37

>Add support for 2011 Dodge RAM replacement WCM functions

 

Renault (Europe) - Carbine/CLIO4 V26.21

> Add matching key method

 

FORD (USA) V27.29

> Add key programming function menu for Ford 2020 Transit, Mustang, Explorer, Conqueror, F150, Fusion, 2019-2020 F550 and other models

> Add key programming function menu for Lincoln 2020 Aviator, Corsair, NAVIGATOR, Continental, MKZ and other models

> Free pin code programming

 

Volvo C30/C70/S40/S60/S80/V40/V70/XC60/XC70 V26.20

> Add folding key matching

> Support all key lost

 

TRUMPCHI - GS7/GS8/GM8 V29.91

> Add large-screen instrument (35xx) instrument mileage repair

 

ROEWE - Clever/IMAX8 V26.98

> Support smart all key lost

 

MG - MG 5/MG Pilot V26.67

> Support smart all key lost

 

VW/ Audi/ Skoda/ SEAT V28.05

> Increase the relevant prompts of the Volkswagen 24C64 menu to improve user experience

> Add 5th generation Touareg network automatic calculation function

 

CHERY V27.20

> Add Chery's own immobilization password calculation

 

GEELY V27.23

>Add new Shanghai Industrial Transportation Security Code Calculation

> Add Haoyue smart key programming

> Add New Jiaji 2020 smart key programming

 

MAXUS V26.32

> Add smart key password reading

 

BAIC MOTOR - Saab V27.09

> SaabkX3 mechanical key system adds ECU reset function

> New eriergy EC5/EU5/EU7/EX5/EX360 models: add password reading function

> Add Saab X3 mechanical key programming

> Add Saab U7, Zhixing (National VI), new D50 (National VI) smart key programming

 

KC501 BMW/ Mercedes-Benz/ Audi V10.03

> Add BMW CAS2-2K79X to read and write FLASH

> Add BMW MEVD1725 engine computer to read and write FLASH

> Add Benz W169 lock head to read and write FLASH data V27.20 V27.23 V26.32 V27.09 V10.03

 http://xtoolsupport.com/

How to Update XTOOL X100 PAD2/Pro

Recently, XTool.UK engineer received many customers emails about how to update Xtool X100 Pad2 and Xtool X100 Pad2 Pro, Here is the instruction on original XTool X100 PAD2 and X100 PAD2 Tablet Key Programmer upgrade

For XTOOL X100 PAD2 and X100 PAD2 Pro, there are only 2 Years of Free Updates now.
After the free period, if you want to update the software but don’t pay for the extra update license, you will meet this error "If the device exceeds the free use period, the customer needs to purchase the corresponding upgrade package."

So, you’d better contact us by providing the Serial Number of the device to get the software update license. The cost is 400USD/Year so far.
https://www.xtool.co.uk/wholesale/xtool-x100-pad2-pro-one-year-update-service.html

Once you get the license, then you can update on your X100 PAD2 or X100 PAD2 Pro tablet directly.

Path: Open the related application, select “Update” and choose single or all software to update depends on your need.

 

If you have any other problem about XTOOL key programmer, please feel free to contact us.

Contact info:

Email: Sales@XTOOL.co.uk
Whatsapp: +86 18223445829

www.xtool.co.uk