Xtool UK Support: (Solved)Honda CR-V 2004 lost all keys with XTOOL X100 Pro2

2021-02-19

(Solved)Honda CR-V 2004 lost all keys with XTOOL X100 Pro2

Q: have Honda CR-V 2004 Lost all keys , i tried to register key using HDS but always goes to FAIL , I'm Using T5/M13 transponder . I scanned the Engine ECU but there are no faultes , so I read the data of the eeprom inside the Immo box , which is 93C46 , and attaached , I want to know if the data is damaged , or the type of the transponder i used is not the required . Can anyone determine the type of transponder needed to register new key

A:Try Try xtool x100 pro from xtool.uk
TOOL X100 Pro2 can program Honda key below:

Immobilizer
Auto

3PIN

16PIN

Manual

Type 1 (3G)

Type 2 (4G)

Smart key system
Type 1 (knob)

Type 2 (button)

Type 3 (button)

Remote

Program remote (9G)

RN6 07-
Here the article of How to use XTOOL X100 Pro2 Program Honda CRV 2004 Chip ID 13 All Keys Lost

Main steps:

When start the car using the key, there is security indicator light appear on the dashboard.

Connect properly X100 Pro2 key programmer and the vehicle via main cable

Select “Immobiliser”-> “HONDA V26.38”->“Immobiliser”-> “Manual”-> “Type 1 (3G)”-> “All keys lost”

Then follow the prompt on the screen to operate:

Switch ignition on

Input the number of the keys

Switch ignition off…on… till it appears “whether security indicator light is extinguished?”

Then switch ignition off…on till program successfully

Now the security indicator light disappears.

Done!

http://xtoolsupport.com/