2021-04-21

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2 (Pro)

Here, xtool.co.uk runs through the process of programming a 2020 Honda Brio, where the customer required a spare key. The process was carried out in the following stages using the XTOOL X100 Pad2 key programmer, which allows for programming without any dismantling of the vehicle.

Vehicle –2020 Honda Brio 16 PIN
Situation – Customer required a spare remote key for the vehicle. The working key can start the car normally, but when insert the new key which is not programmed to turn on the ignition, the light immobilizer appears.

 

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  01

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  02

Equipment needed and why – XTool X100 Pad2/ X100 PAD2 Pro was used, it was chosen as it is reliable and the operation step is easy and simple. Moreover, the Honda 16 PIN key programming is supported.

Check X100 PAD2 (Pro) car list for Honda key programming as below.

Car makerSystem typeYearModelFunction
HondaImmobilizer 3 PIN 
Honda 16 PIN 
Honda Manual Type 1 (3G)

1.Add a key

2.All keys lost

Honda Manual Type 2 (4G)
HondaSmart key system Type 1 (knob) 
Honda Type 2 (button)

1.Add a smart key

2.All smart keys lost

Honda Type 3 (button)

1.Add a smart key

2.All smart keys lost

3.Number of read keys

HondaRemote Program remote (9G)

1.Add remotes

2.Erase remotes

Honda2007-RN6

1.Program remote

2.Remote identification

Step-by-step guide to add new key:

1.Connect X100 PAD2 key programmer to the vehicle via the main cable directly

2.Select Immobilization-> HONDA-> immobiliser-> Auto-> 16PIN

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  03 

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  04

3.Turn the ignition switch on

4.Select Key-> Add a key

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  04

5.Use the original key to turn off the ignition, turn on, turn off, turn on

Then use the new key to replace it, and follow the instruction to turn on and turn off… till it shows “Immobiliser device indicator is off?”. At the same time, check the immobilizer device indicator on the dashboard, if it is off, click “Yes” to continue.

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  05

 Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  06

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  06

Turn on the ignition switch with the original key

6.Key registration has been completed, then turn off the ignition switch

Programming 2020 Honda Brio Spare Key with Xtool X100 Pad2  07

7.Check all keys in order to ensure everyone can start the engine

 

FYI…

Here are some Honda car models that have been tested successfully by XTOOL X100 PAD2/X100 PAD2 Pro.

Honda:

honda Accord 02-07 Reset ECU Sync Ok

simple honda crv 2004 add keys id48 no problem

2007 Honda Civic AKL programmed new key 2 mins

Add key and remote to Honda Civic 2008

honda hr 2015 add key okay
Honda civic 2002 id48 add key ok!

Honda Insight 2010 AKL – OK
civic 2011 add key okay
civic 2007 add key okay
Honda Insight 2010 AKL – OK

Honda CRV 2008 spare key – Program key ID46 – OK

Honda Jazz 2009 AKL 8E chip – OK

www.xtool.co.uk

 

没有评论:

发表评论

How to program a Toyota G Chip Key using xtool D8

  Purpose:   program a G chip key for a Toyota Model:   Toyota Tacoma 2011 Tool option:   Xtool D8 Bi-Directional OBD2 Diagnostic Scanner He...